To Define a Salto Door in Brivo Access

Alicia Allen Updated by Alicia Allen

To Define a Salto Door

  1. Once the Salto Router is selected from the Board and Node dropdown list, the Lock field appears. Enter the lock number for the new Salto door. If the lock number selected is unavailable, a warning will appear in red.
  2. In the Enable Privacy Mode field, click Yes or No to indicate if you want to enable Privacy Mode for this Salto Router.
  3. In the Enable Credential Caching field, click Enable or Disable to indicate if you wish to enable credential caching for this Salto Router. If Enable is selected, enter the number of days (1-30) in the Cached Credential Buffer History field.
  4. In the Pass-through Period field, enter the maximum length of time (1-600 seconds) the door should remain unlocked after a user presents his or her credentials and is authenticated or presses a Request-to-Exit switch. For example, if this value is set to 15, the user has 15 seconds to pass through the door before it automatically re-locks. The default setting is 5.
  5. In the Door Unlock Schedule field, click a schedule from the dropdown list if you want the door to remain unlocked for pre-specified periods of time.
  6. In the Control from Browser field, click Yes or No to indicate if you want to enable the Control from Browser feature to allow Unlock Door to function.
  7. Click Save Door. The Door detail page displays.

How to Define a Door

How to Manage Doors

How did we do?

How to define a door in Brivo Access

How to Manage a Device in Brivo Access

Contact