Brivo Mercury Solutions FAQs

Richard Crowder Updated by Richard Crowder

Brivo Mercury Solutions FAQs

How many doors can I add to a Mercury panel?

How many doors can I add to a Mercury panel?
For the EP/LP1502, EP/LP2500 and LP4502 you can create up to 30 doors per controller using up to 14 MR52 SIOs
For the EP/LP1501, you can create up to 17 doors per controller using up to 8 MR52 SIOs.

Which systems can be converted to Brivo with Mercury?

Which systems can be converted to Brivo with Mercury?
You can convert the following Mercury hardware to Brivo
EP1501 / LP1501
EP1502 / LP1502
EP2500 / LP2500
LP4502

Most panels can be converted by directing the controller to the Brivo Mercury Provisioning Tool while older EP controllers may require the use of the Brivo Mercury OEM Conversion Application.

Directions for converting and configuring Mercury controllers is available here:

Is there a license fee associated with converting a Mercury panel to Brivo?

Is there a license fee associated with converting a Mercury panel to Brivo?
Brivo does not directly charge any additional fees for a panel conversion. The Brivo tools are free to Brivo Authorized installers to convert any supported Mercury controller. There are services available to assist with the data conversion of systems to Brivo. Contact your Authorized Brivo Reseller or Brivo Regional Sales Manager on more information regarding services available to assist in the overall system conversion.

Does Brivo sell Mercury controllers and SIOs?

Does Brivo sell Mercury controllers and SIOs?
Mercury carries a variety of the LP Series controllers and Series 3 SIOs. Download the Mercury Solutions data sheet for more information.

Who can I talk to you about converting an existing Mercury based system to Brivo?

Who can I talk to you about converting an existing Mercury based system to Brivo?
You should always start with a Brivo Authorized Reseller. If you have not already contacted a reseller, please reach out to your local Brivo Regional Sales Manager.

Which card formats are supported with Brivo Mercury Solutions?

Which card formats are supported with Brivo Mercury Solutions?
Standard HID 26 bit
Standard HID 37 bit with Facility Code
Standard HID 37 bit without Facility Code
HID Corporate 1000 35 bit
HID Corporate 1000 48 bit
Wavelynx 56 bit (56-1)

If your format is not listed, please send us a request.

How do I add a Mercury controller to Brivo Access?

How do I add a Mercury controller to Brivo Access?
The Mercury controller must first be converted to Brivo. Once converted, the Mercury controller can be added just like any Brivo Control panel. Refer to the Brivo Mercury Installation and Configuration Guide for more details.

How did we do?

Setting up Multi-Drop for Multiple OSDP Readers per Door

Contact