Pairing a Lock

Pairing a Lock

  1. If you haven't already, start by setting up a Master Code on your device. On the lock keypad press "# (or gear) + 1 + # (or gear) + (Master Code)". Once the Master Code is in place, the device can now be paired with the Gateway.
  2. Navigate to the Properties tab and select the property where the device is being paired.
  3. From the properties page, navigate to the Devices tab.
  4. Click the Add/Remove Device button.
  5. Once on the Add/Remove Device page select the Add Device button to start the pairing process and wait until the screen displays "Awaiting Device".
  6. On the lock, press “(Master Code) + # (or gear) + 7 + # (or gear) + 1 + # (or gear) ”
  7. Locate and press the pairing button on the outlet module to device to enable pairing mode.
  8. Wait for your Brivo Smart Home screen to display "Successfully Added Device".
  9. Change the name and details description for your device if desired.
  10. Click Save to complete the process.

How did we do?

Unpairing a Lock

Pairing a Repeater

Contact